Publicidad
Idiomas disponibles
Idiomas disponibles
4. TECHNICAL CHARATERISTICS AND CONDITIONS OF USE
The technical data of the unit, model and serial number are identified by means of the information displayed on the registration or on the
data sheet that appears on all the products.
Apart from the identifying data of the unit, information relating to the gas refrigerant and electrical voltage to which the unit must be
connected is also displayed.
All the accessories and protectors comply with the same requirements, including all fastenings, nuts and bolts, which will be made of
stainless or zinc-based steel.
The refrigerated unit is designed to be operated using ecological gas refrigerant, approved by the current CE standards.
•
COMPOSITION OF THERMAL INSULATION
The thermal insulation is made from expanded polyurethane 40 kg/m
•
REFRIGERANT
Refrigeration: R-134a/R-290.
5. START-UP
•
FIRST CLEANNING
•
Clean the unit before connecting to the electricity supply.
•
INSPECTION
•
Check that the voltage and power line frequency coincide with those indicated on the specification plate of the
appliance.
•
The unit should not be used in threatening atmospheric or fire risk conditions.
•
Check that there are no defects on the unit resulting from its transportation. The manufacturer will not be liable for
damage suffered during transportation or arising from incorrect storage.
•
Check the operation of the moving components of the unit.
•
GENERAL CONNECTIONS
•
Be sure the power cable is not damaged.
•
If the power cable is damaged it must be replaced by another type H05-VV-F or H05-VVH2-F. This repair must be
performed by qualified personnel.
•
It is essential that the electrical installation to which the unit is going to be connected has an EARTH LEAD, as well as
the necessary thermal and differential magnetic protection.
•
The power supply must have the suitable section for the consumption of the appliance.
•
If various units are installed in a row, each one must be connected independently to the power supply, avoiding the use
of extension leads or multiple plugs.
3
, with expansive agent C4H5F5.
Publicidad
