Starting
Grip the starter handle, slowly pull out the cord with your
right hand until you feel some resistance (the starter
pawls grip), now quickly and powerfully pull the cord.
Push the choke control back to its original position as
soon as the engine attempts to start, and continue trying
to start until the engine starts. Allow the machine to idle
a few seconds before giving full throttle.
CAUTION! Do not pull the starter cord all the way out and
do not let go of the starter handle when the cord is fully
extended. This can damage the machine.
CAUTION! Do not put any part of your body in marked
area. Contact can result in burns to the skin, or electrical
shock if the spark plug cap has been damaged. Always
use gloves. Do not use a machine with damaged spark
plug cap.
Warm engine
Press the air purge repeatedly until fuel begins to fill the
bulb. The bulb need not be completely filled.
Grip the starter handle, slowly pull out the cord with your
right hand until you feel some resistance (the starter
pawls grip), now quickly and powerfully pull the cord.
1157409-49 Rev. 1 2014-11-27
STARTING AND STOPPING
Stopping
The engine is switched off by moving the stop switch to
the stop position.
CAUTION! The stop switch automatically returns to the
start position. In order to prevent unintentional starting,
the spark plug cap must be removed from the spark plug
when assembling, checking and/or performing
maintenance.
–
English
15