Basic Settings - S&P COR-PRO 1000 Manual De Instrucciones

10.3. BASIC SETTINGS

WEEKLY PROGRAMMING
Control allows air curtain operation depending on selected hour period. First, activate this function to pro-
gram below.
Programming menu:
TEMPERATURE PARAMETERS SETTINGS
Sensor type, summer/winter mode, anti-frost, minimum outlet temperature, sensor deviation correction
and external sensor activation.
Anti-frost protection. This system is normally, used for water coil versions. However, for electric
heater versions, it will refer to the minimum admissible temperature in the room. The value will
be 3°C from factory.
Minimum outlet temperature. Regardless all sensor values and setpoints, the air curtain will
maintain this minimum air outlet temperature.
Sensor deviation correction. If sensor is installed in an inappropriate location for architectural
or space reasons, readings offered can be corrected manually.
External sensor activation. Apart from displaying this value on the screen, you can also choose
this parameter as a reference for automatic control.
Weekday and real hour setting menu:
Day of the week
Starts program
Ends program
Program number
Hour
Minutes
Temperature reference selection between outlet
and room sensor.
Winter/Summer mode. If summer is selected, heating system is disabled even if the-
re is a sudden temperature drop. Only anti-frost system will remain active.
Day of the week
Hour
Minutes
EN
21