Important Safety Warnings; Electrical Precautions - Mi-T-M JOB PRO JP Serie Manual De Operación

4

IMPORTANT SAFETY WARNINGS

ELECTRICAL PRECAUTIONS:

RISK OF ELECTRIC SHOCK OR ELECTROCUTION:
Serious injury or death could occur if the pressure washer is
not properly grounded.
electricity and may cause electric shock or electrocution if not used
properly.
1. This product must be grounded. Make sure the pressure washer is equipped
with a GFCI built into the power supply cord. If this is not available, the
pressure washer must be plugged into a receptacle that is protected by
a GFCI. Disconnect when not in use.
2. If your unit is equipped with a GFCI, DO NOT drop the GFCI as damage
could result. If the GFCI is accidentally dropped, be certain to test the
GFCI before using to ensure it is working properly. (Follow instructions
on GFCI for test procedures.)
3. Always be certain the unit is receiving proper voltage. Disconnect when
not in use.
4. DO NOT modify the plug provided with the product. If it will not fit the
outlet, have a proper outlet installed by a qualified electrician. DO NOT
use any type of adapter.
Electrical shock may occur from electrical cord.
5. Check power cord for signs of crushing, cutting or heat damage. If
replacement of plug or cord is needed use only identical replacement
parts
6. DO NOT use extension cords with this pressure washer.
7. Keep all connections dry and off the ground. Do not allow electrical cords
to lay in water or in such a position where water could come in contact
with them. Do not touch plug with wet hands.
8. DO NOT pull on the electrical cord to disconnect from the outlet.
Electrical shock may occur if pressure washer is not operated
properly.
9. DO NOT direct spray on or into electrical installations of any kind! This
includes electrical outlets, light bulbs, fuse boxes, transformers, the unit
itself, etc.
10. DO NOT allow metal components of the pressure washer to come in
contact with live electrical components.
11. Never operate the pressure washer with safety guards/covers removed
or damaged.
Serious injury or death may occur if unqualified persons attempt
electrical repairs.
12. Any electrical wiring or repairs performed on this pressure washer should
be done by Authorized Service Personnel in accordance with National and
Local electrical codes.
13. Before opening any electrical enclosure, always shut off the pressure
washer, relieve pressure and unplug the pressure washer from the power
source. Allow the pressure washer to cool down. Never assume the
pressure washer is safe to work on just because it is not operating. It
could restart at any time! Service in a clean, dry, flat area.
WARNING
Your pressure washer is powered by
WARNING
WARNING
WARNING
Mi-T-M JP-Electric Operator's Manual