Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL INSTRUCTIONS.-
Carefully read through the instructions contained in this
manual. It provides you with important informa- tion
about assembly, safety and use of the machine.
1 This unit has been designed for home use.The user
weight does not have to exceed 120kg.
2 Keep your hands well away from any of the moving
parts.
3 Parents and/or those responsible for children should
always take their curious nature into account and how
this can often lead to hazardous situations and be-
haviour resulting in accidents. This unit does not have
to be used in any case like toy.
4 The owner is responsible for ensuring that anyone
who uses the machine is duly informed about the
necessary precautions.
5 Your unit can only be used by one person at a time.
6 Use suitable clothing and footwear. tie up your
shoelace correctly
ASSEMBLY INSTRUCTIONS.-
1. Take the unit out of its box and make sure that all of
the pieces are there:
ATTENTION: The assistance of a second person is
recommended when assembling this machine
Fig.1 Parts list
(1)
Main body.
(2)
Main post.
(3)
Rear stabiliser bar with adjustable feet.
(4)
Handlebar stem.
(5)
Left focus bar or arm.
(6)
Right focus bar or arm.
(7)
Bottom focus bar, left.
(8)
Bottom focus bar, right.
(9)
Pedal left foot.
(10)
Pedal right foot.
(11)
Left footrest.
(12)
Right footrest.
(13)
Front stabiliser bar with wheels.
(21)
Rod rotation axel.
(26)
Footrest support plate.
(102) Bottom post cover.
(105) Handlebar embellishment cover.
(106) Bottle holder.
(107) Bottle holder support.
(108) Focus bars rotation lock rear covers.
(109) Focus bars rotation lock front covers.
(110) Focus bars bottom lock left covers.
(111) Focus bars bottom lock right covers.
(112) Left embellishment cover of foot pedal wheel.
(113) Right embellishment cover of foot pedal wheel.
(114) Read bottom cover.
(115) Fornt bottom cover.
(117) Left crankshaft joint cover.
(117) Right crankshaft joint cover.
(123) Monitor.
(126) Transformer.
Fig.2 Screws and fasteners.
(32) Screws M-8x15.
(35) Screws M-8x20.
(37) Screws M-8x70.
(39) Screws M-8x60.
(46) Screws M-5x12.
(47) Screws M-5x25.
(51) Screws 8x20.
(52) Screws M-5x25.
(57) Washers M-8.
(58) Washers M-8x38Ø.
(59) Washers M-8X28Ø.
(67) Spring washer M-8.
(75) Self locking nuts M-8.
Allen key 6mm.
Allen key 6mm.
Double ended ring spanner 10-13.
2. FITTING THE STABILISER BARS.-
ATTENTION: The assistance of a second person is
required for this stage of the assembly.
Bring the front stabiliser bar with wheels (13) to the
main body (1) positioning the wheels at the front of the
unit, Fig.3, Insert the screws (39), fit the washers (57)
and spring washer (67), and tighten securely.
Next, fit the rear trim cover (114) and tighten using
screws (51), Fig.3.
Carry out the same operation to attach the rear
stabiliser bar.
Take the rear stabiliser with adjustable feet (3), and
line up the dots, Fig.4. Insert the screws (39), fit the
washers (57) and spring washer (67), and tighten
securely.
Next, fit the fornt trim cover (115) and tighten using
screws (62) Fig.4.
IMPORTANT: It is advisable to retighten these
screws after one month of using the machine.
3. FITTING THE MAIN POST.-
Next, bring the main post (2) up to boss on the main
body (1), Fig.5, connect the terminals (128) and (129),
Fig.5.
Slip the main post (2) over the boss on the main body
(1) in the direction of the arrow, Fig.5, making sure not
to snag any of the cables.
Refit the screws (32), the washers (57) and the spring
washers (67), Fig.5, and tighten securely.
4. FITTING THE FOOT BARS.-
Then fit take the left foot (9) (marked with the letter "L")
and insert the end bush onto the drive spindle (E) on
the main body (1) Fig.6.
Insert screw (35), as shown in Fig.6, then fit the flat
washer (58) and spring washer (67), and tighten
securely.
Take the right foot bar (10), (marked with the letter "R")
and go through the same assembly procedure as with
the left Fig.6.
11
MOD. G860
Publicidad
