Fueling; Starting / Stopping The Engine - Stihl KM 55 R Manual De Instrucciones

Fueling

Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-
up in the tank to release slowly.
After fueling, tighten fuel cap as
securely as possible by hand.
KM 55 R, KM 55 RC
Starting / Stopping the
Engine
Controls
7 1 6
3
5 4
1 Stop switch
2 Throttle trigger lockout
3 Throttle lever
4 Tongue of throttle trigger
5 Catch
Positions of stop switch
6 I – normal run position – the engine
is running or can start
7 0 – engine off – the ignition is
switched off
Starting
2
N Move the stop switch to I.
N Press down the throttle trigger
lockout and hold it there.
N Squeeze the throttle trigger until the
catch on the tongue (4) can be
engaged on the housing.
N Now release the throttle trigger,
tongue and trigger lockout in that
order. This is the starting throttle
position.
English
4
13