Step 4 Attaching The Covers; Attaching The Top Cover; Attaching The Side Covers - Sony VPL-VZ1000 Manual De Referencia Rápida

Step 4

Attaching the Top Cover

Place the top cover on the top of the unit, and align the left
and right position.
Using the top cover
Slide the top cover by the pull on the center of the top
cover.
You can prevent the accumulation of dust on the projection
window by closing the top cover when the unit is not in
use.
Notes
• Do not close the top cover when turning the power on.
• Use the top cover together with the side covers.
• If dust is in the sliding surface, it may scratch the unit.
• When removing the top cover, do not set the top cover upright.
Attaching the Covers

Attaching the Side Covers

After attaching the top cover, place the side covers by
hooking the holes of the side covers to the tabs on the side
of the unit.
Note
Make sure that all 4 holes are hooked to the tabs.
Hole
Tab
11
GB
Attaching the Covers