Technical Information; Installation Considerations - Hansgrohe Talis E Instrucciones De Montaje

1¾"
2
1¼"
4"
⅜"
6"
1⅜"
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This faucet may be used with a continuous
flow water heater if the flow pressure is at
least 20 psi.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.5 GPM
1⅜"
1⅝"