KOBE Brillia Serie Instrucciones De Instalación Y Manual De Operación página 16

Install Accessories
15. Install the Oil Tunnel {G} into recess support near
rear of hood. Refer to Figure 19.
16. Install Baffle Filters {H} and Stainless Steel Spacers
{I}. Angle baffle filter toward back of hood.
Push the baffle filter up until almost level.
forward into recess behind the front of hood.
Lower baffle filter.
resting position. Refer to Figure 20.
17. For Stainless Steel Spacer, follow above steps.
Final Installation
18. Turn power ON in control panel. Check all lights
and fan operation.
19. Make sure to leave this manual for the homeowner.
Slide back until it fits into
Figure 19
Slide
Figure 20
14