Maintenance And Care - Bissell Total Floors 73D2 Serie Guia Del Usuario

M
aintenance and care
Emptying the dirt container
Empty the dirt container as soon as the dirt
reaches the "FULL" lines on the sides of the dirt
container.
1.
Unplug the vacuum from the electrical outlet.
2.
Press the dirt container release button
located on the back of the carry handle
and lift up to remove.
3.
Choose an emptying method. Method #2
is recommended for allergy sufferers.
Method #1 – Hold the dirt container over
a trash can and push the emptying button
located on the back bottom of the dirt
container to open the bottom. Close the
bottom after the dirt empties and make sure
it clicks back into the locked position.
Method #2 – Place a plastic bag over the
bottom of the dirt container. Push the
emptying button, located on the back bottom
of the dirt container, through the plastic
to open the bottom. After the dust settles,
remove the plastic bag to discard. Close the
bottom and make sure it clicks back into the
locked position.
4.
Replace dirt container onto the vacuum by
aligning the bottom and pushing back until it
snaps into place.
10
w w w . b i s s e l l . c a
w w w . b i s s e l l . c a
WARNING:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting
checks.
Emptying
Button
Dirt Container
Release Button
8 0 0 . 2 6 3 . 2 5 3 5
1 - 8 0 0 . 2 6 3 . 2 5 3 5
9