Loading Device Master Data - Aventics RMV04-8DI_M8 Instrucciones De Servicio

112 AVENTICS | PROFIBUS DP | R499050016–BDL–001–AE
Commissioning and Operation
Configuration error
An incorrectly configured bus coupler can lead to
malfunctions in the system and may damage the system.
O
The configuration may only be carried out by qualified
electronics personnel!
O
Configure the bus system in accordance with your system
requirements, the specifications in the device master data
files, the manufacturer's specifications, and all valid
technical standards, directives, and safety regulations.
Take the operator's documentation on configuring the bus
master into account.
The configuration may also be carried out using other
configuration software, but the described parameters and
settings must be adhered to.

7.2.1 Loading device master data

The device master data includes the performance characteristics
of the DP slaves or DP master. The device master data is
standardized in accordance with EN 50170, Part 2, PROFIBUS. In
this way, DP components from different manufacturers can be
implemented within one planning software.
Each valve terminal system is equipped with valves as ordered
and, if applicable, input/output modules as ordered. It must now
be configured as a DP slave and is done in this example with the
program WinDP (AVENTICS).
O
To plan the valve system using AVENTICS WinDP, the device
master data files must be copied in the subdirectory GSD,
ex.: \Master data (GSD)\PROFIBUS\DP\GSD.
For more details, see the "LIESMICH" (Readme) file.
NOTICE