Maintenance And Cleaning - Predator PUR50 Manual Del Usuario

Please make sure to pull out power plug before cleaning the unit. Do not immerse machine
in water or any other liquid. Do not use abrasive, corrosive or fl ammable products to clean
any parts of the unit . The unit uses composite fi lters, so fi lters cannot be washed.
Clean the Air Purifi er
Clean the air purifi er regularly to prevent the dust accumulation.
1. Use soft and dry cloths to remove the dust from the air purifi er.
2. Use soft and dry cloths to clean the outlet and inlet of the air purifi er.
Change Filter
The unit will remind user when fi lter needs to be replaced.
To replace fi lter, follow same steps as covered on page 24.
Then, press fi lter indicator button far 5 seconds. After 3 beeps, LED light turns off. This
resets the fi lter indicator and the unit will begin to recalculate fi lter life from 2,000 hours once
again .
Clean the Air Quality Sensor
Clean air quality sensor every two months to ensure best performance. Clean often if machine
works in dusty environment.
1. Use soft brush to clean intake and outlet of air quality sensor.
2. Disassemble the cover of air quality sensor.
3. Use a dry swab to clean the air quality sensor, air intake and air outlet.
4. Reinstall the cover of air quality sensor.
27

MAINTENANCE AND CLEANING

www.glaziar.com / info@glaziar.com