Interface Pad Application - Acelity PREVENA INCISION Manual De Uso

3
2
1

INTERFACE PAD APPLICATION

CAUTION: Do not place the interface pad directly over the umbilicus.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Hole Template
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
7. Add additional drape as needed to cover foam dressings in
various configurations, as shown.
Smooth KCI Drape to remove creases and seal joints ensuring
•
an occlusive seal.
All liners must be removed before additional drape is used.
•
Press drape down around the length of the adhesive seal to
•
ensure adhesion to the skin.
Press down to seal all drapes.
•
Minimize any creases/wrinkles in drape.
•
Excess KCI Drape can be used to seal leaks.
•
1. Use the oval cutout on the enclosed ruler as a template for hole
size when cutting a hole in the drape for the interface pad. The
removeable label may be used as needed to record date of
dressing application or removal.
2. Near center of foam dressing, carefully cut a hole in KCI Drape
using a scalpel or scissors. It is not necessary to cut into the
foam but if a small amount of foam is removed it will not inhibit
performance.
18