Changing Screen Size
This unit incorporates screen modes of various height and
width ratios. For optimal viewing, we recommend that
you select the screen mode that best matches the video
source that you are viewing. Although these modes are
designed for full display of a picture on a wide screen, it is
our hope that you make use of them with a full
understanding of the manufacturer's intentions.
Screen size selection
The size and range of the picture on the screen can be
switched between 5 screen sizes during video signal
input, and 3 sizes during PC signal input.
Remote control unit
SCREEN SIZE
Display operating panel
1
Press the SCREEN SIZE button.
The current SCREEN SIZE mode is displayed at the
bottom right of the screen.
2
Press the SCREEN SIZE button again in the
SCREEN SIZE mode indications displayed at the
bottom right of the screen.
The setting changes as follows:
SCREEN
SIZE
FULL
During video signal input (INPUT1 to 5)
With INPUT1, 2 and 5, the screen modes you can select
differ depending on the input signal. For details, please
refer to the Supported Video Signal chart on page 46.
3 WIDE
3 4:3
CINEMA 2
During PC signal input (INPUT1)
3 DOT BY DOT
FULL 2
The screen modes you can select differ depending on the
input signal. For details, please refer to the Supported
Video Signal chart on page 46, or the Supported PC Signal
chart on pages 47 to 48.
Notes
÷ When the [WIDE], [ZOOM], or [FULL] setting is used to display
a non-wide screen 4:3 picture fully on a wide screen, a portion
of the picture may be cut off or appear deformed.
÷ Be aware that when the display is used for commercial or
public viewing purposes, selecting the [WIDE], [ZOOM],
[CINEMA] or [FULL] mode settings may violate the rights of
authors protected under copyright law.
÷ When [DOT BY DOT] (except with the PDP-5004/PDP-5014 at
1280 x 768 or the PDP-4304/PDP-4314 at 1024 x 768) or [4:3]
screen size is selected, and when MASK CONTROL is ON
(page 40), the display position moves slightly each time the
power is turned on in order to prevent image burning.
During video signal input
How the picture looks
WIDE
Suitable for when viewing news or
sports programs. Movies or sports
programs can be viewed with an
expansive powerful image.
4:3
Suitable for when viewing news
or sitcoms. The video software
can be viewed in its original
screen frame size.
FULL
Suitable for wide screen images
(squeeze).
ZOOM
Mainly suitable for viewing
Cinemascope size and other such
movie images.
Provides a more expansive,
powerful image.
CINEMA
Primarily suitable for viewing
VistaVision cinema sizes.
Operation
3 FULL
ZOOM 2
3 4:3
27
EN