Introduction; Features - Tripp-Lite BP240V370 Manual Del Propietário

1. Introduction

Tripp Lite's Extended-Run Battery Cabinets connect to SmartOnline® UPS Systems to
provide long-lasting battery backup for data centers, telecommunications, networks,
industrial facilities, security, emergency systems and other mission-critical applications
that require high capacity, high availability and extended runtime.

Features

• Battery cabinets are available in two options: BP240V370 and BP240V370NB.
The BP240V370 model includes jumpers, terminals, breaker, and 40 x of CSB GPL
121000 batteries in a separate pallet for a complete installation. The BP240V370NB
model is a similar kit but without batteries, allowing users the flexibility to purchase
batteries for the cabinet separately.
• Battery cabinets are available in voltages of 240V DC and capacities from 100Ah @
C20 to 1.67VPC.
• Battery cabinets contain multiple 12V DC batteries connected in series for higher
voltages. Up to 3 battery cabinets may be connected in parallel for increased runtime.
• Each battery cabinet contains 6 shelves with 5, 6 or 7 individual batteries (maximum)
per shelf.
• Hinged lockable door facilitates access to batteries for periodic maintenance.
• A minimum of 130 mm clearance is located above the individual batteries for access
to terminals.
• Battery cabinet is constructed of heavy gauge steel.
• Baked powder coat finish provides chip and corrosion resistance.
• Battery cabinet ships bolted to pallet with a double layer of protective stretch wrap and
integrated corner and top protection.
• Appropriate ventilation and convection cooling of individual batteries is provided via
spacing between batteries. Front and rear vents allow the free flow of warmer air out of
the battery cabinet.
• Two molded case circuit breakers are provided for overcurrent protection.
• User-supplied power output cables can be fed into the battery cabinet via built-in
conduit knockouts on top of the cabinet.
• For improved safety, higher power density and minimized maintenance, the cabinet
systems use valve-regulated lead-acid (VRLA) recombinant batteries. The electrolyte
in these batteries is immobilized in either an absorbent mat separator or a gelling
medium, eliminating the spilling hazards and maintenance requirements of free liquid
electrolyte. There is no need to add water or measure specific gravity.
• Because the batteries are recombinant cells that employ an oxygen recombination
cycle, minimal gasses are emitted during normal float charging. Each cell contains
an individual valve, which releases the gas products from overcharge and prevents
pressure build-up within the cell.
18-07-363-933856.indb 3
3
8/1/2018 4:55:36 PM