Blackstone 1517 El Manual Del Propietario página 6

Model 1517 | Owner's Manual | Assembly Guide
!
WA R N I N G
This instruction manual
contains important
information necessary for ASSEMBLY INSTRUCTIONS
the proper assembly and
Please read all instructions thoroughly before proceeding. Make sure all
safe use of the appliance.
the plastic packing material is removed before assembling
!
WA R N I N G
Find a large, clean area to assemble your griddle. Please refer to the parts list
and assembly diagrams as necessary.
Read all warnings
and instructions
Griddle assembly involves large components; therefore,
before assembling the
two people assemble the unit.
appliance, and while
using the appliance.
!
WA R N I N G
S T E P 0 1
The manufacturer has made
down. Unfold the legs and then use the pre assembled wheel bolt and nut to
every effort to eliminate
tighten the wheels onto the legs.
any sharp edges. However,
you should handle all
components with care to
avoid accidental injury.
Some parts may contain
sharp edges, especially
as noted in these
instructions. Wear protective
gloves if necessary.
!
WA R N I N G
The use of alcohol,
prescription or
non-prescription drugs may
impair the consumer's ability
to properly assemble or
safely operate the appliance.
!
C A U T I O N
Two people are
recommended for the
assembly of this product.
08
it is advised to have
Remove the griddle body from the packaging and lay it upside
S T E P 0 2
Assemble the upper and lower tank hangers with four (4) M6x38
bolts and four (4) flange nuts.
Place the bottom tray between the griddle legs and use one (1) large thumb-
screw to tighten it on the left.
S T E P 0 3
Use one (1) long thumbscrew to attach the assembled tank
hanger and the tray onto the unit. Then use one (1) M6x60 bolt and a flange
nut to secure the tank hanger.
Assembly Guide | Owner's Manual | Model 1517
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
09