Kohler K-1569 Guia De Instalacion página 4

2. Roughing-In Dimensions
IMPORTANT! All dimensions are nominal. The stud opening tolerance is plus 1/4" (6mm) and minus 0.
Carefully measure your fixture before determining enclosure size. When a fire rated wall is specified,
dimensions are to the inside of the wall board. Some shimming between the stud frame and the fixture
may be required. Dimensions given in the roughing-in information are crucial for proper installation.
Construct the framing and plumbing accurately.
NOTE: If a firewall is required, roughing-in dimensions will have to increase according to the thickness of
the firewall material. Stud opening dimensions must be measured toward the exposed side of the wall
material.
NOTE: If installing this unit to a masonry wall, make provisions for plumbing connections. Construct a
separate frame wall a minimum of 6" (15.2cm) from the masonry wall.
1030526-2-A
36"
(91.4cm)
60" (152.4cm)
K-1569
8-1/2" (21.6cm)
30" (76.2cm)
84" (213.4cm)
3/8" (1cm)
4 Kohler Co.