IV. Guarantee conditions
The manufacturer provides 24 months guarantee on material and function according
to the guarantee conditions. Excepted are hose, plastic rollers and the hose stopper.
The manufacturer is not liable for damages caused by improper operation and installation by
the user. Arbitrary opening and possible removal and replacement of the hose also cancels
the guarantee.
V. Assembly advices before initiation
1. Installation should be done only by a trained technician.
Be sure the tension and fastening are correct.
2. Mount hose winder bracket with screws to a sufficiently stable wall or ceiling.
The hose runout should be on top.
3. Once the winder has been sufficiently fastened you can connect the inlet and the
desired tool.
4. For series L701/705: Teflon ribbon for sealing recommended.
5. Check the seals, the rotating coupling and the hose for leaks.
6. Make sure that the rotating coupling can turn freely with the winder.
7. Expect pressure loss when connecting couplings and changeable plugs that have
different flow sizes.
VI. Operation
1. Unwinding: Pull hose slowly to the desire length. „Clicks" indicate the catch locations.
Pull out maximum to the marking.
2. Winding up: Pull hose slowly and hold the end. Catch is released.
Allow hose to wind up under guidance.
VII. Maintenance and inspection
-
CE - Declaration of Conformity
We, PLANETA-Hebetechnik GmbH hereby declare under our sole
responsibility that the product:
PLANETA Hose Reel - Serie G701, G760, L701, L705
in serial production correspond with the following rules of directive:
EC-machine dirctive 98/37/EC
, General Manger PLANETA
– 7 –