Setting Date And Time - Veridian Healthcare 01-513BL Manual De Instrucciones

SETTING DATE/TIME
IT IS NECESSARY TO SET THE DATE AND TIME
FOR THE UNIT EVERY TIME BATTERIES ARE
INITIALLY INSTALLED OR REPLACED.
The date/time feature is on the lower right of the display screen. This
unit stores the date and time, including year, allowing for a
date/time stamp on all readings in the memory recall function.
1. When the unit is off (a blank display
screen), press and hold the SET button
for 2-3 seconds to activate the display.
The display will illuminate and the year
will begin flashing.
2. MONTH / DATE / YEAR—press the
MEM button to advance the display to
the desired year, press SET to confirm
your selection.
Repeat for Month and Date-MEM to
advance, SET to confirm.
10 • ENGLISH