Declaration Of Conformity; Environmental Protection - Würth MM 230 Manual De Instrucciones

Maintenance / Care
Important!
The device may only be cleaned with
the mains plug disconnected.
Keep device and ventilation slots clean.
In the unlikely event of a failure or defect, have the
appliance examined and repaired by an authorised
customer service point for Würth tools.
In all your queries and spare part orders, always
quote the product number (see type plate) of your
device.

Environmental protection

Do not dispose of the device with
domestic waste. Have the device
disposed of by an authorised waste
management company or your
municipal waste management
organisation. Adhere to the applica-
ble regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmentally
friendly manner.
Warranty
This Würth device is covered by warranty according
to the applicable national regulations. The warranty
period begins on the date of purchase (please retain
invoice or delivery note as proof of purchase).
Faults covered by warranty shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by warranty.
Claims can be recognised only if the device is in a
non-disassembled state and presented to a Würth
branch office, your Würth sales representative or a
customer service office authorized by Würth.
Technical changes reserved.
We accept no liability for printing errors.
16
Spare parts
In the unlikely event of a failure or defect, have
the device repaired by a Würth masterService
workshop.
In all your queries and spare part orders, always
quote the product number (see type plate) of your
device.
The current spare parts list of the device can be
viewed online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.

Declaration of Conformity

We herewith declare that this product conforms with
the following standards and directives:
Standards
• EN 60974-1:2007,
• EN 60974-10:2007
in accordance with the regulations stipulated in the
directives:
EC directive
• 2004/108/EC
• 2006/95/EC
EU directive
• 2011/65/EU
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PCV
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, Germany
M. Strobel
Director
Product Management
Künzelsau: 01.12.2014
Dr.-Ing. S. Beichter
Director Quality,
Authorised Signatory