18"
(45.7 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in rim style
Fixture*:
Bathing well:
Basin area, bottom
51-3/8" (130.5 cm) x 21" (53.3 cm)
Basin area, top
64-1/2" (163.8 cm) x 30-1/2" (77.5 cm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
72 gal (273 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
70-1/2" (179.1 cm) x 34-1/2" (87.7 cm)
V
Pump: 1-speed
120
Heater: 1.5 kW
120
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
1063769-1-D
72" (182.9 cm)
3/4" (1.9 cm)
K-1124P-H
Hz
A
60
7
60
12.5
required
No change in measurements if connected
with drain illustrated. (K-7272)
Pump/Control Access
20" (50.8 cm) W x 15" (38.1 cm) H
19"
(48.3 cm)
Required Electrical Service
Two dedicated circuits required, each protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
41 lbs/square foot (201 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to CSA B45 and ANSI Standard Z124.1.2. All
dimensions are nominal.
2
1-1/2"
(3.8 cm)
Drop-in Rim Detail
36" (91.4 cm)
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.