CAPITAL SPORTS ERGO PRO Manual Del Usuario página 20

Press repeatedly to select the display area you want to edit. The selected area will be high-
MODE
lighted by a flashing „SET".
SET Press repeatedly to change the value in the selected area (TIME, DISTANCE or CALORIES).
RESET Press to delete the current value.
Press any key to start the pulse test. Your heart rate will be displayed after a short latency of about 3 - 4 seconds.
SPEED Shows your current speed in the format 0.00 ~9.99 ~ 99.9 kph.
Measures the workout time (max. 99 minutes 59 seconds). Upon reaching a preset time the
TIME
device will beep. The clock stops automatically after 3 seconds of no pedal movement.
Displays the distance covered (max 99.9 km). Upon reaching a preset value the device will
DISTANCE
beep.
Displays the consumed calories in the form 0:00 ~ 99.9 ~ 999. Upon reaching a preset value,
CALORIES
the unit will beep.
Take hold of the contact surfaces with your hands in order to measure the pulse rate. The
PULSE RATE measuring range is 40 to 240 bpm.
After 25 seconds of no measured pulse signal, the display shows „?".
The console automatically turns off after 8 minutes without any operation or pedal movement.
AUTO ON/OFF
Press any key or move the pedals to wake the device up.
• The device runs with two batteries (type AA, not supplied). Put these into the battery compartment, according to
the poling diagram.
• Operating temperature: 0°C - 40°C; storage temperature: -10°C - 60°C
• The devive is used to determine approximate values and hence is not suitable for medical or therapeutic purposes.
Using the Training Console
Buttons
Functions / Display
Technical Information
20