Charging The Battery Pack Abroad - Sony Handycam HDR-XR500 Guía De Operaciónes

See page 58 on charging, recording and playing time.

When your camcorder is on, you can check the approximate amount of remaining battery power with the

remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
Retract the viewfinder and close the LCD screen. Slide the BATT (battery) release lever 
and remove the battery pack .
To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the battery pack. "
Notes on the battery pack and the AC Adaptor
When you remove the battery pack or disconnect the AC Adaptor, retract the viewfinder and close the

LCD screen, then make sure that the
access lamp(p. 44) are turned off.
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This

may cause a malfunction.
In the default setting, the power turns off automatically if you leave your camcorder without any

operation for approximately 5 minutes, to save battery power ([A.SHUT OFF]).

Charging the battery pack abroad

You can charge the battery pack in any countries/regions using the AC Adaptor supplied
with your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.
Do not use an electronic voltage transformer.

US
1
(Movie) lamp/ (Photo) lamp (p. 15)/ACCESS lamps (p. 13)/