Best WC35I Manual De Instrucciones página 10

DUCTED INSTALLATION ONLY
Note: Rooms with 10-foot ceiling
require flue extension model
AEWC345SB, available from your
local dealer. Discard the upper flue
supplied with the range hood and
replace it with the longer flue
extension.
1. Press the damper over the duct connector
on the hood and tape joint with aluminum
duct tape. Fig. 11.
2. Run 6-inch diameter metal ductwork to
the outside location.
3. Install an appropriate wall or roof cap with
damper to exhaust the air to the outside.
4. Tape all duct joints with aluminum duct
tape.
5. Plug power cord into wall outlet.
6. Install upper and lower decorative flues
onto the range hood.
- Vents are concealed on 8-foot
ceilings.
- Vents are exposed on 9-foot
ceilings.
7. Secure upper flue to flue mounting bracket
with (2) 3.9 x 6 mm screws.
6-INCH DIA.
METAL DUCT
DUCT
CONNECTOR
CONCEALED
VENTS
- 10 -
DAMPER
FIG.11
CEILING
FIG.12
FIG.13