Transport; Stockage; Recycling - Garland XTRIM 140 DW Manual De Instrucciones

9. TRANSPORTATION
Before transporting this machine, unplug
always the battery of the machine.
Hold the machine by the handle with the machine
switched off and away from body parts. Proper
handling will reduce the chance of accidental contact
with the cutting tool.
If you are transporting the machine in a vehicle,
secure it firmly to prevent it from sliding or tipping
over.
10. STORAGE
Store this tool in a safe place not accessible to
children and in a way that does not endanger any
person and is dry, clean and at a temperature
between 0ºC and 45ºC.
Unplug the battery from the machine before
store it and, to prevent damage to the battery,
always charge it to the maximum. If you are not going
to use the
machine in a long period of time, recharge
battery every 30 days. Never store the battery
downloaded.
Store batteries away from metallic materials
such as clips, coins, keys, nails, screws or
other small metal materials that can
accidentally make connection between terminals
and produce a short circuit. Short circuit to battery
It may cause the battery to explode or burn.
The battery will discharge more slowly at low
temperatures.
Before storing the machine, follow the points in the
maintenance chapter.
The unused machine must be stored clean, on a flat
surface.
11. INFORMATION ON THE DES-
TRUCTION OF EQUIPMENT / RE-
CYCLING
The battery of this machine contains elements
dangerous for health and the environment and must
be recycled appropriately. Do not throw away the
battery
in the trash, take it to an official waste collection point
waste.
Dispose of your appliance in a
ecological. We must not dispose of
machines together with household
garbage. Its plastic and metal components can be
classified according to their nature and recycled.
The materials used to pack this
machine are recyclable. Please don't pull
packaging to domestic garbage. Pull
these packages at an official collection point
waste.
39/124
English