Longshine LCS-SW1420S Manual Del Usuario página 26

After clicking the 14+2G.E. Gigabit Clustering Switch, main screen shows up.
Function
<Home>
Shortcut to back to home page
<Save>
Save the current setting to Non-volatile Memory. The difference
between <Save> and <Apply> is that Apply applies settings right away
but saves the values in the system memory. Every time when switch
reboots, system obtains system parameters from Non-volatile Memory
you <Saved> before but not system memory.
Select the one(s) you want to save parameters, then click "Save" button
to save it to Non-volatile Memory.
<Default> Make the switch(es) returning to factory default value. Select the switch
and click "Default" button, the selected-switch(es) will return to initial
value. If you want to clear the previous value in the System Memory,
please <Save> it.
Statement
E-25