Baby auto KUDOS fix 123 Manual De Uso página 20

5. Push the child seat against the car seat to check that the
ISOFIX system is fully latched, ensuring that the child seat is as
close to the car seat as possible (fig. 3.5).
6. Locate the Top Tether attachment point in your car (it could
be behind the seat, in the boot or on the ceiling) and connect
it (fig.3.6).
Look for this symbol
in your vehicle.
7. Pull the Top Tether strap until the safety indicator turns green
(fig. 3.7).
Uninstalling the iSOfix system
8. To release the ISOFIX anchor points, pull the button on the
anchors to unlock them. This will release the child seat (fig.
3.3).
4. FaStenInG tHe cHIlD IntO tHe Seat GrOUp 1
Adjusting the height of the headrest
The correct adjustment of the headrest ensures that the child
is properly fastened into the car seat. The headrest must be
adjusted so that the harness (which moves with the headrest)
is at shoulder height on the child or slightly above, but never
behind the back or at ear level (fig. 4.3).
1. Put your hand on the headrest and push the lever upwards
while holding the seat down with your other hand to prevent it
from moving (fig. 4.2).
2. Press the harness adjustment button
of the seat while simultaneously pulling both harness straps
towards you to loosen it (4.1).
3. Open the harness buckle
buckle (fig. 4.4).
20
(D)
(c)
by pressing the red button on the
on the front part
(l)