Baby auto KUDOS fix 123 Manual De Uso página 21

4. To make it easier to fasten the child into the seat, put the
buckle's metal connectors into the covers
5. Sit the child on the seat and fit the safety harness around the
child.
6. Connect the 2 parts of the fastener, inserting them into the
buckle until you hear a click (fig. 4.6) which indicates that it is
securely locked.
7. Pull the harness adjustment strap
tightened (fig. 4.7). Remember that in order to guarantee the
child's safety, harnesses must be well-tightened.
5. FaStenInG tHe cHIlD IntO tHe Seat GrOUp 2 anD 3
nOtIce
Before installing the seat for Group 2-3, you must remove the
harness straps that fit around the crotch and abdominal areas.
Ensure that the headrest is at the appropriate height. It is very
important that the child's shoulders are just below the headrest and
that their head does pass the top of it.
Removing harnesses and the safety buckle
1. Use one hand to press the harness adjustment button
the front part of the seat while simultaneously pulling both
harness straps towards you to loosen it (fig. 5.1).
2. Remove the fastener
outwards until it is completely removed. The chair will be
unlocked. Tilt the chair forward (fig. 5.2).
3. From the back of the backrest, unfasten the harness straps
from the metal connector in order to release them (fig. 5.3).
4. Remove the headrest cover. On the back of the headrest, there
will be a plastic screw which holds the harness bracket.
Only for use with Group 2-3 from approx.
4 to 12 years of age (15-36 kg)
(H)
from the side of the chair by pulling
(N) on both sides.
(E) until the harness is fully
(D) on
21