Assemble The Surface Burners; Electric Ignition - LG LSCG366 Serie Manual De Usuario

I N S TA L L AT I O N I N S T RU C T I O N S

5. ASSEMBLE THE SURFACE BURNERS

CAUTION
DO NOT operate the burners without all parts in
place.
Place the burner caps and heads on the cooktop.
Make sure that the caps and heads are placed in the
correct locations.
Medium burner
head and cap
6. CHECK IGNITION OF SURFACE BURNERS
Operation of all cooktop burners should be checked
after the COOKTOP and gas supply lines have been
carefully checked for leaks.

ELECTRIC IGNITION

Select a top burner knob, push down and then turn
counterclockwise to the "LITE" position.
You can hear a clicking sound indicating proper
operation of the spark module.
Once the air has been purged from the supply lines,
burner should ignite within 4 seconds.
After burner ignites, rotate knob out of the "LITE"
position. Try each burner in succession until all
burners have been checked.
12
Make sure the hole in the burner head is positioned
over the electrode.
Extra large burner (Center)
head and cap
Small burner
head and cap
Lrage burner
head and cap
ELECTRIC IGNITION
The combustion quality of burner flames needs to be
confirmed visually.
If burner flames look like A, call for service.
B or C is normal burner flames, depending on the
type of gas you use.
With LP gas, some yellow tipping on outer cones is
normal.
Hole
Electrode
A Yellow flames — Call for service
B Yellow tips on outer cones
— It is normal for LP gas
C Soft blue flames
— It is normal for natural gas