For Your Safety; Preparing For Installation - LG LSCG366 Serie Manual De Usuario

READ ALL INSTRUCTIONS BEFORE INSTALLATION
IN THE COMMONWEALTH OF MASSACHUSETTS
• This product must be installed by a licensed
plumber or gas fitter.
• When using ball type gas shut-off valves, they shall
be the T-handle type.

FOR YOUR SAFETY

WARNING:
this manual is not followed exactly, a fire or
explosion may result causing property damage,
personal injury or death.
– Do not store or use combustible materials,
gasoline or other flammable vapors and
liquids in the vicinity of this or any other
appliance.

PREPARING FOR INSTALLATION

TOOLS YOU WILL NEED
Phillips screwdriver
Flat-blade screwdriver
Pencil and ruler
MATERIALS YOU MAY NEED
Joint
Sealant
I N S TA L L AT I O N I N S T RU C T I O N S
If the information in
Open-end or
adjustable wrench
Pipe wrench(2)
(one for support)
Pipe Fittings Shut Off
Valve
Flexible Connector
• A flexible gas connector, when used, must not
exceed 3 feet in length.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switches,
• Do not use any phone in your building.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier
instructions.
• If you cannot contact your gas supplier, call
the fire department.
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
MATERIALS YOU MAY NEED
• Gas line shut-off valve
• To reduce the possibility of gas leaks, apply teflon
tape or a thread compound approved for use with
LP or Natural gases to all threaded connections.
• Flexible metal appliance connector (5/8" I.D.)
A 3-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing a new
cooktop.
• Flare union adapter for connection to gas supply
line (3/4" or 1/2" NPT x 5/8" I.D.)
• Flare union adapter for connection to pressure
regulator on cooktop. (1/4" NPT x 1/2" I.D.)
• Liquid leak detector or soapy water.
3