Warranty / Procedure In Case Of Repair; Product Specifications - Ivoclar Vivadent Bluephase G4 Instrucciones De Uso

7. Warranty / Procedure
in Case of Repair
The warranty period for Bluephase G4 is 3 years from
the date of purchase (battery: 1 year). Malfunctions
resulting from faulty material or manufacturing errors
are repaired free of charge during the warranty period.
The warranty however does not confer rights to
compensation for any material or non-material damage.
The apparatus must only be used for the intended
purposes. Any other uses are contraindicated. The
manufacturer does not accept any liability resulting
from misuse and warranty claims cannot be accepted in
such cases. This is particularly valid for:
• Damage resulting from improper handling, especially
incorrectly stored batteries (see Product Specifi cations:
Transportation and storage conditions).
• Damage to components resulting from wear under
standard operating conditions (e.g. battery).
• Damage resulting from external influences, e.g. blows,
drops to the floor.
• Damage resulting from incorrect set-up or installation.
• Damage resulting from connecting the unit to a
power supply, the voltage and frequency of which do
not comply with the ones stated on the rating plate.
• Damage resulting from improper repairs or
modifications that have not been carried out by
certified Service Centres.
In case of a claim under warranty, the complete
apparatus (handpiece, charging base, battery, power
cord and power pack) must be returned, carriage paid,
to the dealer or directly to Ivoclar Vivadent, together
with the purchase document. Use the original
packaging with the corresponding cardboard inserts for
transportation. Repair work may only be carried out by
a certified Ivoclar Vivadent Service Centre. In case of a
defect that cannot be rectified, please contact your
dealer or your local Service Centre (see addresses on the
reverse side). A clear description of the defect or the
conditions under which the defect occurred will
facilitate locating the problem. Please enclose this
description when returning the apparatus.
The product has been developed solely for use in dentistry. Processing should be carried out strictly
according to the Instructions for Use. Liability cannot be accepted for damages resulting from failure
to observe the Instructions or the stipulated area of application. The user is responsible for testing the
products for their suitability and use for any purpose not explicitly stated in the Instructions.

8. Product Specifications

Ivoclar Vivadent Polywave
Light source
Wavelength range 385–515 nm
Light intensity High Power program: 1,200 mW/cm
PreCure program: 950 mW/cm
Operation 3 min on / 7 min off (intermittent)
Light guide 10 mm, autoclavable
Signal transmitter Beeps every 10 seconds and every time the
Start/Stop button or the Time/Program
selection button is activated or the anti-glare
protection is enabled or the curing process is
aborted
Dimensions of the hand- L = 170 mm, B = 30 mm, H = 30 mm
piece (without light
guide)
Weight of the handpiece 135 g (including battery and light guide)
Operating voltage of the 3.7 VDC with battery
handpiece 5 VDC with power pack
Operating voltage of the 100–240 VAC, 50–60 Hz, max 0.1 A
charging base without
radiometer
Operating voltage of the 5 VDC
charging base with
integrated radiometer
Power supply Input: 100–240 VAC / 50 –60 Hz max 1 A
Output: 5 VDC / 3 A
Manufacturer: EDAC POWER ELEC.
Type: EM1024B2
Operating conditions Temperature +10 °C to +35 °C
Relative humidity 30 % to 75 %
Ambient pressure 700 hPa to 1060 hPa
Dimensions of the D = 110 mm, H = 55 mm
charging base
Weight of the charging 155 g
base without radiometer
Weight of the charging 145 g
base with radiometer
Charging time Approx. 2 hours (with the battery empty)
Power supply of the Li-Ionen battery
handpiece (approx. 20 min. with a new, fully charged
battery in the High Power program)
Transportation and Temperature –20 °C to +60 °C
storage conditions Relative humidity 10 % to 75 %
Ambient pressure 500 hPa to 1060 hPa
The curing light has to be stored in closed,
roofed rooms and must not be exposed to
severe jarring.
Li-ion battery:
– Do not store at temperatures above 40 °C /
104 °F (or 60 °C / 140 °F for a short period).
Recommended storage temperature
15–30 °C / 59–86 °F
– Keep the battery charged and store no
longer than 6 months.
Delivery form 1 Charging base with power cord and power
pack
1 Handpiece
1 Handpiece support
1 Light guide 10 mm
1 Anti-glare shield
3 Anti-glare cones
1 Pack of sleeves (1x 50 pcs)
1 Instructions for Use
LED
®
2 ± 10 %
± 10 %
2
19