Focusing; Black-Out Mechanical Dimmer; Cleaning And Maintenance - LDR Tango 1500msr FF Instrucciones De Manejo

Once the alignment is correct you can start using your followspot.
13. FOCUSING
This fixture features a variable beam angle from 4° to 8°. The variable beam is modified by
adjusting the front and rear zoom lenses in relation to each other.
The front lens defines the beam spread, the rear lens defines the focus degree of 'softness' or
'hardness' of the beam edge or shutters.
14. BLACK‐OUT MECHANICAL DIMMER (DOWSER)
Your followspot is fitted with an adjustable mechanical dimmer (dowser) to dim and finally black‐
out the light. The black‐out mechanical dimmer is located between the front of the lens‐tube and
the colour changer. A screen printing is provided on the upper front cover of the lens tube (near
the lever operating the dowser) to help you position the dowser at the required dimming position
(0% ‐ 100%)
15. CLEANING AND MAINTENANCE
To ensure maximum performance of the product, a regular maintenance service should be carried
out. Please make sure the product is cold and disconnected from power supply when doing this.
General maintenance
* Clean all reflective parts such as reflectors, mirrors and lenses opening the product, if necessary.
* Check the lamp and the lenses and replace any visibly damaged component.
* Clean air ducts and fans in order to allow proper ventilation activity on the product.
* Check internal and external wiring and replace any cable which should be damaged by heat or
mechanical agents.
Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it
LDR TANGO 1500msr FF User's manual – 1.1
Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy
9