Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1 - INTRODUCTION
IMPORTANT! All local regulations, including
those that refer to national or European
regulations, must be applied when installing this
device.
The way the E-30 Stove is installed will decisively
affect safety issues and its correct operation.
It is important to install the fireplace correctly. For
the correct installation of the E-30 Stove and
chimney, we recommend the installation be
performed by a professional.
The E-30 Stove provides heat by radiation; directly
heating walls, ceilings...
2 - PRESENTATION
E-30 wood stoves have the following main
features:
•
Made in 3 sizes: L, M and S, to meet each
users' heating requirements.
•
•
Door handle
Primary/glass pane
cleaning air valve
Lighting up valve
Ash-pan
•
Made of cast iron, with parts that are
assembled, sealed and screwed together.
•
Cast iron or Vermiculite lined. (By model)
•
They are designed for use with firewood
only.
•
They can burn pieces of wood up to 40, 50
or 60 cm. in length, depending on the model.
•
Lighting up valve
•
Primary air adjustment valve.
•
Self-cleaning glass.
•
Hinged front door opening 180º with
ceramic glass pane.
•
Ash pan with cover
•
Optional outside air connection located on
the back of the ash pan.
•
Vertical top smoke flue
•
In model E-30 M also horizontal outlet
through the back (MT model)
•
Fully factory assembled, ready for
connection to the chimney.
FIG. 2
Outside air
connection
Publicidad
Tabla de contenido
