Incorrect Measurement; Disposal - Beurer BF 18 Instrucciones Para El Uso

7. Incorrect measurement

If the scale detects an error during weighing, „BF
If you step onto the scale before "0.0" appears in the display, the scale will not operate properly.
Possible causes of error:
– The maximum load-bearing capacity of 150 kg
(330 lbs) was exceeded.
– The electrical resistance between the electrodes
and the soles of your feed is too high (e.g. with
heavily callused skin).
– Your body fat lies outside the measurable range
(less than 5 % or greater than 80 %).
– Your percentage of water lies outside the measu-
rable range (less than 43 % or greater than
75 %)

8. Disposal

Used, fully discharged batteries must be disposed of in a specially labeled collection contai-
ner, at toxic waste collection points or through an electrical retailer. You are under legal obli-
gation to dispose of batteries correctly.
Note: You will find these markings on batteries containing harmful substances:
Pb = battery containing lead, Cd = battery containing cadmium, Hg = battery containing
mercury.
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electro-
nic Equipment).
If you have any queries, please contact the appropriate local authorities.
" or " " appears in the display.
Remedy:
– Only weigh the maximum permissible weight.
– Repeat weighing barefoot. Slightly moisten the
soles of your feet if necessary. Remove the cal-
luses on the soles of your feet if necessary.
– Repeat weighing barefoot.
– Slightly moisten the soles of your feet if neces-
sary.
– Repeat weighing barefoot.
– Slightly moisten the soles of your feet if necessary.
13
Pb Cd Hg