Installing The Light Kit Assembly - Fanimation Andover FP5220 Serie Manual Del Propietário

CAUTION
To avoid possible electrical shock, be sure electricity is
turned off before installing downlight assembly.
1. Loosen two screws and remove one screw from support
flange. (Figure 1).
2. Securely attach the Adapter Plate to the Support bracket
and tightening three screws. (Figure 2)
3. Securely attach plugs from motor to sockets on Downlight
Support Plate Assembly (Figure 3)

Installing the Light Kit Assembly

9
Figure 1
Figure 2
Figure 3