GLW MC25 Manual De Instrucciones página 58

TROUBLE-SHOOTING
3. Remove the cable
 Pull the pin (1) upwards and pull out the end
sleeves (2).
 Close the cover (3).
 Connect mains cable (4).
 Turn on (position I) the mc 25 with the mains
switch (5).
 Press the reverse button (6) to move the mc 25
into start position.
 Pull out the cable (7).
After mounting the tool insert and insertion of the
end sleeves the mc 25 is ready for operation.
4. Remove the cable
 Press the reverse button (2) and pull the cable
(1) at the same time, the mc 25 moves into start
position.
 Pull out the cable (3).
 Remove the tool insert (4).
 Remove end sleeve (5).
After mounting the tool insert the mc 25 is ready
for operation.
20
Diagram 25 Remove the cable
Diagram 26 Remove the cable
10/12