Makita UC120D Manual De Instrucciones página 2

ENGLISH
SPECIFICATIONS
Chain speed per minute
Length of guide bar
Saw chain
Standard battery cartridges
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
INPORTANT SAFETY INSTRUC-
TIONS
WARNING:
WHEN USING A CORDLESS CHAIN SAW,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED TO REDUCE
THE RISK OF FIRE, ELECTRIC SHOCK,
AND INJURY TO PERSONS, INCLUDING
THE FOLLOWING:
READ ALL INSTRUCTIONS
1. Keep Work Area Clean
Cluttered areas invite injuries. Do not start cut-
ting until you have a clear work area, secure
footing, and a planned retreat path from the fall-
ing tree.
2. Consider Work Area Environment
Use extreme caution when cutting small size
brush and saplings because the slender material
may catch the saw chain and be whipped toward
you or pull you off balance. Do not operate a
chain saw in a tree unless specifically trained to
do so. When cutting a limb that is under tension
be alert for spring back so that you will not be
struck when the tension in the wood fibers is
released. Do not expose chain saw to rain. Do
not use chain saw in damp or wet locations. Do
not use chain saw in presence of flammable liq-
uids or gases.
Model
Type
Pitch
No. of drive links
Overall length
Net weight
Rated voltage
3. Guard Against Electric Shock
Prevent body contact with grounded surfaces.
For example: metal pipes, wire fences.
4. Keep Children Away
USA013-1
Do not let visitors contact chain saw. All visitors
should be kept away from work area.
5. Store Idle Chain Saw
When not in use, chain saws should be stored in
a dry, and high or locked-up place - out of the
reach of children. When storing saw, use a scab-
bard or carrying case.
6. Do not Force Chain Saw
It will do the job better and safer at the rate for
which it was intended.
7. Use Right Tool
Cut wood only. Do not use chain saw for purpose
not intended - for example - Do not use chain
saw for cutting plastic, masonry non-wood build-
ing materials.
8. Dress properly
Do not wear loose clothing or jewelry. They can
get caught in moving parts. Rubber gloves and
non-skid footwear are recommended when work-
ing outdoors. Wear protective hair covering to
contain long hair.
9. Use Safety Glasses
Also use safety footwear; snug fitting clothing;
protective gloves; and head protection.
10. Carrying Saw
Carry the chain saw with the saw stopped, finger
off the switch, the guide bar and saw chain to the
rear.
2
UC120D
160 m/min.
115 mm (4-1/2")
25 AP
1/4"
42
468 mm (18-1/2")
2.2 kg (4.8 lbs)
D.C. 12V
1222, 1234