Makita TD001G Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening capacities
No load speed (RPM)
Impacts per minute
Rated voltage
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Machine screw
Standard bolt
High tensile bolt
4 (Max impact mode)
3 (Hard impact mode)
2 (Medium impact mode)
1 (Soft impact mode)
Wood mode
T mode (1)
T mode (2)
Bolt mode (1)
Bolt mode (2)
Bolt mode (3)
4 (Max impact mode)
3 (Hard impact mode)
2 (Medium impact mode)
1 (Soft impact mode)
Wood mode
T mode (1)
T mode (2)
Bolt mode (1)
Bolt mode (2)
Bolt mode (3)
4 mm - 8 mm (5/32" - 5/16")
5 mm - 16 mm (3/16" - 5/8")
5 mm - 14 mm (3/16" - 9/16")
D.C. 36 V - 40 V max
1.7 - 2.0 kg (3.7 - 4.3 lbs)
2 ENGLISH
TD001G
0 - 3,700 /min
0 - 3,200 /min
0 - 2,100 /min
0 - 1,100 /min
0 - 1,800 /min
0 - 2,400 /min
0 - 3,700 /min
0 - 2,500 /min
0 - 3,700 /min
0 - 3,700 /min
0 - 4,400 /min
0 - 3,600 /min
0 - 2,600 /min
0 - 1,100 /min
0 - 4,400 /min
-
0 - 2,600 /min
-
0 - 4,400 /min
0 - 4,400 /min
120 mm (4-3/4")
BL4025 / BL4040
DC40RA