Battery Operation - Sangean DPR69+ Manual De Instrucciones

Battery operation using alkaline batteries
1. Remove the battery cover on the back of the unit by sliding the cover
in the direction of the arrow.
2. Slide the switch inside the battery compartment to the
Alkaline position.
3. Insert four LR6 (AA size) alkaline batteries into the spaces in the
compartment. Take care to ensure all batteries are inserted with the
correct polarity as shown on the back of the radio. Then replace the
battery cover.
Important:
when using alkaline batteries the battery switch must be placed
in the alkaline position. Failure to do so could result in serious
damage to the batteries or radio.
When the batteries are exhausted, the battery light will show red for
a short while. The radio will then switch itself off. It may not be
possible to switch the radio back on until the batteries are replaced,
or until the radio is connected to the mains adaptor.
If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
We would recommend for economy that the ecologic 1 is used via
the AC adaptor whenever possible with battery operation for
occasional or stand-by use only. If extended listening using
batteries is anticipated, then the use of rechargeable batteries
is recommended.
GB
4