User Setup Options; Figure 14. Main Control Panel - Zodiac Jandy Pro Serie Manual De Instrucciones

Page 20
ENGLISH
5.4

user setup options

The User Setup options allow the user to select specific
Languages, Temperature Scale, Spa Timer, and Display
Light options.
language setup
1. Make sure the control is in the oFF mode.
2. To enter the User Setup mode, press and hold the
MEnu button for 5 seconds.
notE The display will revert back to oFF after one
minute since the last key press.
3. To select a language, use the up or down button
to display sElECt usEr sEtup lanGuaGE .
Press the MEnu button. The sElECt
lanGuaGE EnGlisH (default language)
appears, use the up or down button to scroll
through the language options. When you reach the
desired language, press the MEnu button to select
the language. Press pool or spa to exit the
User Setup mode.
temperature scale setup
1. Make sure the control is in the oFF mode.
2. To enter the User Setup mode, press and hold the
MEnu button for 5 seconds.
3. To select temperature scale, use the up or down
button to scroll through to display sElECt
usEr sEtup tEMpEraturE sCalE . Press
the MEnu button. The sElECt tEMp sCalE
°F (default temperature scale) appears, use the
up or down button to scroll through the scale
options. When you reach the desired temperature
scale, press the MEnu button to select. Press
pool or spa to exit the User Setup mode.
spa timer setup

Figure 14. Main Control panel

®
Jandy Pro Series JE Heat Pumps
1. Make sure the control is in the oFF mode.
2. To enter the User Setup mode, press and hold the
MEnu button for 5 seconds.
3. To select spa timer, use the up or down button to
scroll through to display sElECt usEr sEtup
spa tiMEr . Press the MEnu button. The
sElECt spa tiMEr Continuous (default
spa timer setting) is displayed. To turn the spa
on or off indefinitely, press the MEnu button to
select.
To select the length of time for the spa to run,
use the up or down button to scroll to display
sElECt spa tiMEr tiME sElECtion . Press
the MEnu button to select. The display sElECt
spa tiME 01:00 Hrs (default time setting) is
displayed. Use the up or down button to select
the length of time for the spa to run (between
00:15 to 23:00 hours incremented by 00:15
minutes). Press the MEnu button to select how
long the spa will run. Press pool or spa to exit
the User Setup mode.
display light setup
1. Make sure the control is in the oFF mode.
2. To enter the User Setup mode, press and hold the
MEnu button for 5 seconds.
3. To select display light setup, use the up or down
button to scroll through to display sElECt
usEr sEtup displaY liGHt . Press the
MEnu button. The sElECt displaY liGHt
2 Min tiMEout (default display light setting) is
displayed. This option allows the display light to
turn off after 2 minutes. Press the MEnu button
to select. Use the up or down button to scroll
to display sElECt displaY liGHt liGHt
oFF , this option allows the display light to turn
off, press the MEnu button to select. Use the
up or down button to scroll to display sElECt
displaY liGHt liGHt on , this option allows
the display light to turn on, press the MEnu
button to select. Press pool or spa to exit the
User Setup mode.
|
Installation and Operation Manual