Scene Setup - Lutron GRAFIK Eye QS Serie Manual De Montaje Y Utilización

Scene Setup

Program a Scene
1. Enter programming mode (see page 12).
Main menu
2. Use the master buttons to highlight "Scene setup" and
press the OK button to accept.
Timeclock
Scene setup
Scene setup 3. Use the master buttons to select "Levels" to adjust lighting
and/or window treatment levels. Press the OK button to
accept. Use the master buttons to select the scene
Scene setup
number of your desired scene. Press the OK button to
accept.
Levels
4. Set each zone to the desired light level for this scene using
Labels
the zone raise/lower buttons. The info screen will display
the zone and percentage as you adjust it.
To set a zone as unaffected, lower the light levels all the
Scene setup
way to off, then hold the zone lower button for 3 seconds.
When all zones are at the desired level, press the OK
Scene 1
button to accept.
5. Use the master buttons to set the fade time for this scene.
Press the OK button to accept.
Scene 1
6. Press the button on a shade column that will take the
window treatments assigned to that shade column to the
level you want for this scene. Repeat for any additional
Set zones
3 seconds
shade columns. Press the OK button to accept. Or, if you
do not have or do not wish to set shade groups for this
scene, press OK.
Scene 1
7. The info screen will display a confirmation screen that your
scene has been saved.
Adjust fade
3 seconds
8. Exit programming mode (see page 12).
Scene 1
Set shade
Saved
groups
R
Saved
1
2
GRAFIK Eye QS System Installation and Operation Guide 16
®
Master
buttons
OK
OK
button
2 3 4 5
3
Zone Raise
Zone Lower