Mediclinics Saniflow CP0016V-ASTM Instrucciones De Instalación Y De Seguridad página 10

- Inspect the belt: it should be properly secured to the changing station, it should not be frayed, the
belt buckle must "click" when closed and it should be easily adjustable. If any of the requirements
is not met, the belt must be replaced.
- Inspect the label: if it is missing, damaged, illegible or not properly attached, a new one should be
placed.
For proper cleaning, follow these steps:
- In order to avoid contact with the detergent, it is recommended to remove the liners from their
housing before cleaning.
- Clean all plastic pieces of the changing station using antibacterial soap.
- On the CP0016VCS model, avoid contacting the stainless steel front with the antibacterial soap; it
has to be cleaned with a standard stainless steel cleaner and a soft cloth.
- Remove the soap residue with a dry cloth, making sure that the cleaning has been effective and
that there are no residues of dirt or soap.
- After the changing station has been dried, put the liners back in their housing and close the front
cover with the lock.
- Carry out a final visual inspection to make sure that the baby changing station has been properly
cleaned.
- Leave the changing station in a closed position.