Zero Return Range; Backlight; Unit Selection - OHAUS EC Serie Manual De Instrucciones

EC Series

5.5 Zero Return Range

Sets the level in which the zero point
is stable; the higher the setting, the
more stable.
The following settings are available:
0, 1, 2, 3, 4, 5 (level)

5.6 Backlight

Sets the activation mode of the
backlight.
The following settings are available:
0 = Auto-on with items greater than
9d placed on the pan or any
key is pressed; turns off after 5
seconds of inactivity.
1 = Manual; press the decimal point
key [.] to switch the backlight
on or off.

5.7 Unit Selection

Sets the active weighing unit.
The following settings are available:
0 = Grams (g), 1 = Pounds (lb)
5.8 APW Re-computing
Sets the APW re-computing mode.
Optimizes piece weight accuracy by
automatically re-computing the
existing APW as further pieces (less
than the original quantity on the pan)
are added (a beep will sound in this
event).
The following settings are available:
0 = Off, 1 = On
Weight g
Piece Weight
0..
Default Setting Zero Return Range
Weight g
Piece Weight
0..
Default Setting
Weight g
Piece Weight
0..
Default Setting
Weight g
Piece Weight
0..
Default Setting APW Re-averaging
Count
g/pc
------.
t.rAtE
Internal Count
(disregard)
Count
g/pc
------.
bL
Backlight Internal Count
(disregard)
Count
g/pc
------.
Unit
Weighing Unit Internal Count
(disregard)
Count
g/pc
------.
AV
Internal Count
(disregard)
EN-11
pcs
pcs
pcs
pcs