LG LSCI307ST Guía Para El Uso & Instrucciones De Instalación página 11

Cocina a inducción de vidrio cerámico
Ocultar thumbs Ver también para LSCI307ST:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

I N T RO D U C T I O N TO I N D U C T I O N C O O K I N G
SELECTING COOKWARE
SELECTING THE PROPER PAN SIZE
• There are 4 Cooking Zones on the induction
cooktop. Each element requires a minimum
pan size to be used effectively. The inner ring
of each cooking zone is a guide to correctly
match the minimum pan size. The bottom of
the pan must fully cover the inner ring for
proper cooking to occur.
• The thicker outer ring at each Cooking Zone
is helpful to determine the pan MAXIMUM
size. After centering the cookware on the
Cooking Zone, make sure the cookware
does not extend more than 1/2ʺ beyond the
thicker line on the Cooking Zone. The pan
must make FULL contact on the glass
surface without the bottom of the pan
touching the metal cooktop trim.
COOKWARE SELECTION AND PLACEMENT
It is important that the proper cookware be used and placed correctly on the cooktop. ANY one of the
incorrect conditions shown below may be detected by the sensors located below the ceramic cooktop
surface. If this happens, one or more of the Cooking Zones will not heat, and an F will appear in the
affected Cooking Zone display. Correct the problem before attempting to use the cooktop.
CORRECT
Cookware centered
Flat pan bottom &
correctly on Cooking
straight sides.
Zone surface.
Pan rests completely
on the cooktop
surface.
pan size =
53⁄4ʺ (145 mm)
Pan size meets or
exceeds the
recommended
minimum size for
the Cooking Zone.
Pan is properly
balanced.
Minimum pan size =
71⁄4ʺ (180 mm)
Minimum
Only use the supplied pan on the
bridge element.
If a pan made of the correct material is centered
properly on any of the active Cooking Zones but is
TOO SMALL, the affected Cooking Zone LED will
blink and the pan will not heat.
INCORRECT
Cookware not
Cookware not
centered on
centered on
Cooking Zone
Cooking Zone
surface.
surface.
Pan bottom rests on
cooktop trim or does
not rest completely
on the cooktop
surface.
Minimum pan size =
5ʺ (125 mm)
Pan does not meet
the minimum size
required for the
Cooking Zone
used.
Heavy handle
tilts pan.
11

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido