Description; Technical Characteristics; Safety Instructions; Manual Safety Symbols - Kripsol KS Serie Manual De Instrucciones

1. DESCRIPTION

To prevent unnecessary calls to service technicians, prevent possible accidents and obtain the very bes
performance from you pump, PLEASE READ THIS MANUAL CAREFULLY.
These electric pumps have been designed to recirculate lightly treated water in private and public
swimming pools, spas and water features.

1.1 TECHNICAL CHARACTERISTICS

Motor:
Power:
Insulation:
Service:
Protection:
Voltage:
Consumption:
Frequency:
R.P.M.:
Shaft:
Bearings:
Ambienttemp:

2. SAFETY INSTRUCTIONS

This manual contains the instructions required for the installation, use and maintenance of the KS
PUMP. To achieve the maximum performance indicated by the manufacturer in the description
ensure you follow all recommendations contained in this manual. Doing so will ensure safe and
long-lasting operation of the unit.
CAREFULLY READ AND FOLLOW ALL SAFETY INSTRUCTIONS PROVIDED IN THE
MANUAL AND INDICATED ON THE UNIT.
Ensure safety labels are kept in good condition and replace them in the event of loss or damage

2.1 MANUAL SAFETY SYMBOLS

All instructions that refer to risks to personal safety are indicated with the following symbols:
This symbol indicates a danger. Whenever you see this symbol on the unit or in
the manual, look for one of the following messages to find out about the potential
DIN Standard
risk to personal safety.
4844-W9
DANGER
Other instructions regarding the operation of the unit which could cause
ATTENTION
physical harm if not carried out.
English
See nameplate
Class F
Continuous
IP55
See nameplate
See nameplate
See nameplate
See nameplate
Stainless steel
Shielded ball bearings
Maximum 40º C
This symbol warns of risks that will cause a fatal or serious personal
injury or serious material damage if ignored.
This symbol warns of risks that may cause a fatal or serious
personal injury or serious material damage if ignored.
This symbol warns of risks that will or may cause a minor personal
injury and/or material damage if ignored.
Pump:
Watertemp.:
Maximumpressure: 2 bar
Turbine model:
Sealtype:
Diffuser: Noryl charged with fibre glass
Turbine: Noryl charged with fibre glass
Pumpbody: Synthetic material (PPO)
Filtercover: Synthetic material (SAN)
Basket: Synthetic material (PP)
ø intake: 2" Gas thread
Glue connection ø1.5"/ ø50 / ø2"/ ø63
ø discharge: 2" Gas thread
Glue connection ø1.5"/ ø50 / ø2"/ ø63
22
Maximum 50º C
Closed
Mechanicalseal