Important Safety Instructions; Rating Plates; Responsibility; Regulations - Kripsol KS Serie Manual De Instrucciones

Special instructions not relating to risks.
NOTICE
ELECTRICAL DISCHARGE HAZARD.
DIN Standard
4844-W8

2.2 IMPORTANT SAFETY INSTRUCTIONS

The following basic safety instructions must always be observed when operating this unit:
1.The unit should be commissioned by qualified personnel or installers.
2. Do not connect the installation to the mains water supply or to a high pressure network.
3. Only use the unit in swimming pool or spa installations.
4. Air inside the installation may cause explosions. You must ensure that all air has been
removed from the installation before starting up the unit.

2.3 RATING PLATES

The information provided on the rating plate or any other instructions provided by the
manufacturer on the unit must be strictly adhered to. The contents of plates and instructions are
reflected in this manual under points.
"1.1. TECHNICAL CHARACTERISTICS AND CHARACTERISTICS AND DIMENSIONS".

2.4 RESPONSIBILITY

Failure to comply with the instructions provided by the manufacturer in this manual for the
selection, handling, installation, commissioning and maintenance of the unit will release the
manufacturer or distributor of any liability for possible personal accidents or damage caused to
the rest of the installation, and will render the guarantee null and void.

2.5 REGULATIONS

Our brand of electric pumps are manufactured in accordance with the essential health and safety
requirements stipulated in European Community Directives 2006/42/EC, 2004/108/EC and
2006/95/EC (transposed into Spanish Law in Royal Decrees 1644/2008, 1580/2006 and 7/1988
and amendment 154/1995, respectively).

2.6 GENERAL SAFETY INSTRUCTIONS REGARDING USER SAFETY.

The safety of the unit supplied can only be guaranteed if used as indicated in the
diagrams contained on
DIN Standard Under no circumstances must the operating conditions and limits indicated in this
4844-W9
manual
electrical rating plate located on the unit be exceeded. Compliance with the
Safety Regulations in force in each country is mandatory.
To reduce the risk of injury, the unit should be installed and commissioned
by qualified personnel or installers.
This pump is intended for use in permanent swimming pools, spas and
water features. Do not use in collapsible swimming pools.
Dangerous pressure levels. Incorrect installation of this unit can
cause serious injury or damage to the installation. Carefully read and
follow the manual's instructions during installation and operation of the unit.
"ILLUSTRATIONS AND ELECTRICAL
(CHAPTER 1.1. TECHNICAL CHARACTERISTICS)
23
DRAWINGS".
or those indicated on the
provisions of the