List Of Materials; Parts Supplied; Parts Not Supplied - ELICA EVI642S1 Guía De Instalación, Uso Y Mantenimiento

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly with blower and
LED lamps already installed
5x45 mm
4.2x8 mm
4 x 8 mm
3.5x6.5 mm
2.9x3 mm
Leveling screws
8x40 mm
Tools/Materials required
• Wire nuts
• Tape to mount template
• 8" (20.3 cm) rounded metal duct length to suit installation
• Measuring tape
• Pliers
• Gloves
• Knife
• Safety glasses
• Electric drill with ⁄ " and
5
1 6
• Strain relief
• Spirit level
• Duct tape
• Phillips (Posidrive) #2 Screwdriver
• Wire cutter/stripper
• Masking tape
• Hammer
• Saw, jig saw or reciprocating saw
Pieces
4
60
4
4
2
2
4
⁄ " bits
3
8
Supplied Part
Lower and upper duct covers
8" round air transition
Duct cover brackets
Vertical supports
Torx adapter
Mounting template
Parts no supplied
Parts needed
• Home power supply cable
• 1 - ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Optional accessories and consumable parts
KIT
Long Chimney
Extension
in Line Blower
1200 Kit
External Blower
1200 Kit
Pieces
Upper: 2
Lower: 2
1
4
Upper: 4
Lower: 4
#10: 1
#20: 1
1
# Part
KIT0145610
KIT0154387
KIT0153054
5