Controlling Audio - JVC KW-V960BW Guia De Inicio Rapido

Controlling Audio

You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [FNC] button.
2
Touch [
].
3
Touch [
].
4
Touch [Audio].
Ñ
Controlling General Audio
1
Touch [Fader / Balance].
2
Set each parameter as follows.
■ [Fader], [Balance]
Adjust the volume balance around the
touched area.
[C] and [D] adjust the right and left volume
balance.
[R] and [S] adjust the front and rear volume
balance.
■ [Center]
Clear the adjustment.
Ñ
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
1
Touch [EQ / SW Level].
2
Touch the screen and set the Graphic
Equalizer as desired.
Gain level (area in dotted frame)
■
Adjust the gain level by touching each
frequency bar.
You can select a frequency bar and adjust its
level by [R], [S].
[Preset Select]
■
Display the screen for selecting the preset
equalizer curve.
■ [Memory]
Saves the adjusted equalizer curve as "User1"
to "User4".
■ [Initialize]
Initialize (flatten) the current EQ curve.
[ALL SRC]
■
Apply the adjusted equalizer curve to all
sources. Touch [ALL SRC] and then touch
[OK] on the confirmation screen.
[Bass EXT] (Bass Extend Settings)
■
When turned on, the frequencies lower than
62.5 Hz is set to the same gain level (62.5 Hz).
[SW Level]
■
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
"None".
Controlling Audio
25
English