JVC KW-V960BW Guia De Inicio Rapido página 8

Basic Operations
■ [Camera]
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
For details, see Camera Setup (P.56) in
the Instruction Manual.
[OEM SETUP]
■
This function requires a commercial adaptor.
Consult your JVC dealer for details.
■ [DEMO]
Set the demonstration mode. Default is "ON".
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.70) in the Instruction Manual.
Security Code Setup
You can set up a security code to protect your
receiver system against theft.
When the Security Code function is activated,
the code cannot be changed and the function
cannot be deactivated. Note that the Security
Code can be set with a 4 to 8 digit number of
your choice.
Preparation
• Set [DEMO] to [OFF] in the Special screen. See
Special Setup (P.73) in the Instruction Manual.
1
Press the [FNC] button.
h Popup menu appears. h
2
Touch [
].
h HOME screen appears.
h
8
3
Touch [
].
4
Touch [Security].
h Security screen appears.
5
Touch [Security Code Set] on the Security
screen.
h Security Code Set screen appears.
6
Enter a security code with 4 to 8 digits
and touch [Enter].
7
Enter the same code again and touch
[Enter].
Now, your security code is registered.
NOTE
• Touch [BS] to delete the last entry.
• If you enter a different security code, the
procedure returns to step 6 (for first code entry).
• If you have disconnected the Receiver from the
battery, enter the correct security code as that
you have entered in step 6 and touch [Enter]. You
can use your receiver.
].
h
h