Consejos Generales; Operation; Starting; Using A Single Disc - Skymsen MASTER-SS Manual De Instrucciones

5.3 Diagrama Eléctrico Mod. PAIE-S
110 y 220 Volts
F
N
M CONTACTOR

6. CONSEJOS GENERALES

- Do not wear loose fitting clothes while operating the unit. Do not use bracelets or any other
piece of jewelry. Have your hair always shortened and held up (use hair fishnets if necessary)
in a way it cannot reach any part of the machine. Roll up any loose sleeves.
- SKYMSEN is not responsible for any harm or injury caused by the negligent or
inappropriate use of this equipment by any operator. This equipment must be operated only
by persons whose age equals or exceeds 18 years old, in a safe and sound state of mind, free
from the influence of any kind of drugs and alcohol, that received proper training and
instructions regarding the correct operation of this machine, that are wearing correct and
authorized safety clothes. All and any kind of modifications carried on and applied to this
machine immediately nullifies any kind of warranty and may result in harm and injuries to
the individuals operating this machine and to individuals that are located in the machine
surrounding areas while it is being operated.
- Under no circunstances place your hands in the moving parts of the machine while it is
being used. Make sure the machine has come to a complete stop before acessing the
processed ingredients.
47
Llave
Sensor Magnético
Llave Prende/Desliga
Picture - 05
01- Round Feeding Throat
02- Oblong Feeding Throat

3. Operation

3.1 Starting

Always turn the machine off when you want to change the discs.
Wait until the disc has come to a complete stop before opening the disc
Make sure that the disc chamber lid is closed and properly locked.
To turn the machine on, use the ON/OFF switch located on the right side of the
equipment.
MASTER-SS
The Food Processor model
One of them prevents the machine from working while the disc chamber lid is
opened, this way providing more safety to the user. However, do not use it to switch
the machine OFF and ON. When the lid is closed, the machine switches on
automatically.
The other safety device is activated when the feeding bar is lifted, switching the
machine off and on again when the bar is lowed down.

3.2 Using a single disc

Always use the plastic expeller disc, it doesn't matter which cut disc is in
use. Before opening the disc chamber lid, make sure the disc has come to
a complete stop.
01
02
IMPORTANT
chamber lid.
brings two safety devices:
IMPORTANT
08